How to clean pipes and drains? Clogged Pipe Cleaning

Sink from a sink or sink can clog in any bathroom or kitchen. However, not everyone knows how to deal with such a problem. It turns out that cleaning pipes and removing drains is an activity that even a novice plumber can do. We advise you on how to do this and successfully clean the pipe.

Sewerage installation: prevention is better than cure
In order for the sewer system to function correctly, it must be properly made. It is especially important to adhere to the diameters and weights of the lines indicated in the technical specifications. The material from which the installation is made is also important. Today, plants are usually made of plastic, which has many advantages (among other things, very smooth inner surfaces of pipes, resistant to scale formation and aggressive chemicals).

However, even the best installation will be clogged if we do not use it properly. It should be remembered that the following should not fall into the sewer system:
a large amount of food residue, especially when it is oily;
solid waste, such as: bones, rags, cotton wool, feathers, sawdust;
garbage, sand;
chemically aggressive substances.

The sewer system may be partially clogged - then the outflow from the plumbing equipment will be slow or completely stop - the water does not drain at all, so it can flood the bathroom or kitchen.

Siphon clogged: how to clean sewer pipes when water does not want to drain
If water does not want to drain from the sink, it means that the sewer pipe is clogged. The siphon is designed to prevent odors from entering the sewer system into the premises. When this does not happen, you must clean it. New siphons (plastic or steel) are designed so that unscrewing them is not a problem. A vessel should be placed under the siphon so that water and impurities enter it.

Worse when it's an old, cast-iron siphon. To clean it, it is better to call the plumbing - it is difficult to disassemble and clean it. Most siphons have so-called revisions through which a spring can be inserted. However, cleaning a cast-iron siphon is not easy. Best of all, a cast-iron siphon should be replaced with a plastic one as soon as possible.

All siphon elements, especially the gasket, must be cleaned before reassembly. The rubber gearbox is installed in its place and tightens the siphon cover, disassembled earlier. Apply a masking socket to its pipe. Place the siphon tube into the hole in the wall and tighten the siphon mounting nut. Finally, check how the water flows and whether the siphon is securely installed.

Simple cleaning device - pusher
Pushers are best suited for cleaning jams and drains. It is necessary to clean the storm sewer is very cheap. A traditional pusher consists of a pole and a rubber cup attached to it. The modern one is equipped with a pneumatic mechanism, thanks to which a person using a pusher can use less effort. Before you start unscrewing the pipe, you must close the drain hole. Then close the drain hole with a rubber cup and press it several times into the drain hole. When the water collected in the sink or the sink drains, you must pour fresh and repeat the procedure until we are satisfied with this effect. Thus, the blockage will be pushed into the further part of the sewer system with a large diameter. This method of cleaning, although effective, can lead to blockage of the drainage pipe over time in an inaccessible place. To avoid this, you can try a lesser-known but more effective way.The rubber goblet must be placed over the sink drain, press lightly and pull it up quickly. Impurities clogging the drain must fall into the sink, from where it is easy to remove.

Chemicals - will they remove clogs from sewer pipes?
They dissolve the dirt collected in the siphon, but if the drain pipe is clogged, they can be ineffective. On the shelves of the shops you can meet several different measures to clean the sewer system. However, they are not intended for every installation. Even the best product used incorrectly will not help, it can even damage.